-
Aplomb Wall is an exploration of the expressive possibilities of pure cement, fluidized in the mold and exciting to both the eye and the touch, thanks to its special amalgamation. Like the original pendant model, Aplomb Wall takes a dimensional leap: from the world of architecture and construction (reminiscent of its raw material) to a lamp for domestic spaces. With its oblique shape, the diffuser integrates seamlessly with the supporting wall, allowing for a wider diffusion of light. The cement completely shields the light, yet it emerges from both the large upper opening and the smaller lower one. The upward-directed beam reflects off the wall and ceiling, intensely illuminating the room without ever causing glare. The more delicate downward-directed beam, on the other hand, creates a refined interplay of light on the wall. It is available in gray, a color that highlights its materiality, in an elegant white, and in a warm brown tone. It is perfect for any environment that speaks a direct and essential architectural language, used individually or in sequences with perspectives along a wall or hallway.
-
Lámpara de pie de exterior de luz directa hacia abajo. Difusor y poste en material composite sobre base de fibra de vidrio pintado con líquido. El difusor está hecho de tiras de material compuesto modeladas manualmente sobre el molde, las cintas superpuestas crean la superficie trenzada que sucesivamente se pinta a mano. Los bordes inferiores y superiores cuentan con una vuelta de cinta más para completar el difusor. En el centro, una placa en PMMA transparente con incisiones en láser, captura y difunde la luz que proviene de los LED multi chip que se encuentran instalados en el perímetro de la estructura en aluminio que hace las veces de disipador.
-
Wall lamp with reflected and diffused light. Internal diffuser in blown glass with an acid-etched finish, external diffuser formed by polycarbonate arcs fixed to a chromed metal mount and polymethyl methacrylate spheres. Wall mounting plate and mount, where the lighting component is located, molded under pressure from zamac and painted with aluminum-colored epoxy powders.
-
An iconic outdoor lamp. Inspired by the way a fishing rod bends, Twiggy Grid captures the flexibility, clarity, and strength of that image, combining them into an object with a strong personality. Made of a composite material with a painted fiberglass base, PMMA, and aluminum.
-
Furnishing through light. Superficie is a wall lamp with a striking presence and geometry, yet remarkably thin. Its defining feature—a clean, unusual oval—but especially the interplay of concave and convex points, and the resulting chiaroscuro effects, make Superficie a refined focal point of the room, even when switched off. When lit, the lamp casts an intense but never dazzling light. Superficie's two-dimensionality is also made possible by the possibilities offered by LED technology: the light source is miniaturized, allowing for minimal thickness and a clean, minimalist design. Much more than a simple lighting fixture, Superficie is designed to be an iconic presence in homes and other public spaces: it illuminates while furnishing, and it also furnishes when not illuminated. Subtle and versatile, Superficie can be mounted vertically or horizontally. It defines the ambiance while minimizing its thickness, making it ideal for narrow passageways or where a discreet presence is desired. Born to be alone, Superficie thrives even when repeated in series.
-
Outdoor table lamp with direct downward light. Diffuser and post made of composite material on a liquid-painted fiberglass base. The diffuser is made of strips of composite material shaped by hand on a mold; the overlapping strips create the woven surface, which is then hand-painted. Foscarini and Marc Sadler's passion for researching new technologies has given rise to iconic projects like Twiggy, an arched post made of composite material on an enamelled fiberglass base. For outdoor use, the project was completely redesigned, both in terms of the lighting's technical aspects and the diffuser's aesthetics, which in the Grid outdoor version is interwoven. The reading and table versions stand out for their successful synthesis of simple form and distinctive personality: they share the same diffuser and post base, but the stem extends vertically.
-
Table, floor, and pendant lamp with diffused and direct light. Conical diffuser and tube in thermoplastic elastomer; injection-molded cone and extruded tube. Conical internal diffuser in opal polycarbonate, translucent polycarbonate shield. The fixture is supplied with an IP44 outdoor terminal; the packaging includes a plug for adapting it to an indoor lamp and instructions for shortening the tube. The on/off switch is located inside the tube at the end of the diffuser cone.
-
Diffused light floor lamp. Diffuser formed from a single element of rotationally molded polyethylene with a direct predisposition for mounting on the stand. Stem, base, and diffuser support made of metal treated with cataphoresis for considerable corrosion resistance, then powder-coated with polyester. Two height versions are available—high and low—and three options for ground mounting: repositionable base, stake, or cylinder for in-ground installation. Neoprene-insulated electrical cable for outdoor use without an in-line switch, equipped with IP65 or IP44 terminal blocks for countries with a second Schuko.CEE 7/7 plug. LED retrofit. Suitable for damp locations. Non-dimmable.
-
All the values that characterize a product of excellence are found in the new Top Sense collection. These represent the culmination of research aimed at discovering a new sensation related to comfort: achieving absolute well-being. The cover is treated with Bayscent® Neutralizer, a special technology used in the outer fabric to selectively eliminate odors while maintaining the fabric's characteristics (appearance, softness, breathability). Available with Total Body quilting, wool, or cotton, the Adaptive Top Sense mattress cover is removable with a zipper and easy to care for. For added comfort, the cover features removable quilting, available in hypoallergenic fiber or down. 6D tapes: an advanced ventilation system for maximum mattress breathability. Bialveolar natural latex for enhanced breathability.
-
Wavecare is ideal for those who are used to sleeping on springs and are looking for greater comfort and a constant temperature while they sleep. COVER AND PADDING The cover has zippers all around the perimeter, allowing you to remove the mattress cover for cleaning. The lining is made of jacquard fabric treated with Sanitized Actifresh, which keeps the mattress fresher for longer and ensures better daily hygiene. ERGONOMIC BLOCK 1st layer: Ergonomic block in thermoregulating viscoelastic PCM with 7 molded zones featuring an anatomical wave pattern.
2nd layer: Independent springs (9 cm high) rest in an anatomical position, their pressure relaxing the intervertebral discs.
3rd layer: Anatomical pattern mirrored in negative with respect to the first pattern, perfectly following the body's contours. Perimeter band: Innovative special anatomical subdivision. -
Made entirely from organic materials, this mattress is a unique example of Italian craftsmanship, featuring hand-tufted upholstery on the surfaces and sides. The ergonomic core, composed of two layers of individually wrapped springs and two layers of micro-springs, is finished with a symmetrical filling of horsehair, cotton, hemp, latex, and cashmere. It is available in three firmness levels: soft, medium, and firm. Additionally, the double size offers two different firmness levels, one for each side of the mattress: soft/medium, soft/firm, or medium/firm. ERGONOMIC BLOCK . Cashmere . Talalay Latex . Hemp . Cotton . Horsehair . Cover Springs . Pocket Springs
Are you a professional? Contact with us
